Wuhan Ouyi Optoelectronic Technology Co., Ltd.
Wuhan Ouyi Optoelectronic Technology Co., Ltd. Diligence, pragmatism, efficiency, innovation
Add to Cart
BIDI 10G SFP Module 1270nm DFB Laser RX1330nm Simplex LC Connector 10KM SFP+ LR
PRODUCT DESCRIPTION
The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.
SFP+10G-LR modules Complaint with IEEE 802.3ae 10GBASE-LR,Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit SFP module “SFP+”,1270nm DFB transmitter, PIN photo-detector,LC connector,2-wire interface for management specifications compliant with SFF 8472 digital diagnostic, Compliant with SFF8472 Digital Diagnostic Standard(DDM)
SFP+10G-LR Single-Mode Transceiver is SFP+ modules for duplex data communication as 8G Fiber Channel, IEEE 802.3ae 10G Base-LR/LW It is SFP+ 20-PIN Connector to allow hot plug capability.
Digital diagnostic monitor functions are available via I2C. This module is designed and operates at DFB Laser 1270nm wavelength.
The SFP+10G-LR modules offer customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications.It is a mallest 10G form factor Supports 10GBASE Ethernet and OTU2/OTU2e .
Applications
10GBASE-ER/EW
10G Fiber Channel
10G Ethernet with FEC
PRODUCT FEATURES
| 1270nm DFB Transmitter, PIN Photodiode and TIA |
| All-Metal housing for superior EMI Performance |
| SM 9/125um up to 10Km |
| Simplex LC Connector Bi-Directional SFP+ Optical Transceiver |
| Built-in digital diagnostic monitoring functions |
| Power dissipation < 1W, Single 3.3V power supply |
| Compliant to SFP+MSA |
| Operating Case Temperature Standard: 0℃~+70℃ |
| Electronic Interface compliant with SFF-8431 |
| Digital Diagnostic Monitor Function Compatible with SFF-8472 |
| Compliant with IEEE 802.3ae 10GBASE-LR/LW |
Recommended Operating Conditions
| Parameter | Symbol | Unit | Min | Typ | Max |
| Storage Temperature Range | Ts | ℃ | 0 | 70 | |
| Power Supply Voltage | Vcc | V | 3.135 | 3.465 | |
| Data Rate | Gb/s | - | 10 | - |
Specification of Transmitter
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Average Output Power | POUT | -6.5 | 1 | dBm | Note (1) | |
| Extinction Ratio | ER | 3.6 | 5.0 | dB | ||
| Center Wavelength | λC | 1260 | 1270 | 1280 | nm | DFB Laser |
| Side Mode Suppression Ratio | SMSR | 30 | dB | |||
| Spectrum Bandwidth(-20dB) | σ | 1 | nm | |||
| Differential Line Input Impedance | RIN | 90 | 100 | 110 | Ohm | |
| Output Eye Mask | Compliant with IEEE802.3 z (class 1 laser safety) | Note (2) | ||||
Note (1): Measure at 2^7-1 NRZ PRBS pattern
Note (2): Transmitter eye mask definition
V. Specification of Receiver
| Parameter | Symbol | Min. | Typ. | Max. | Unit | Note |
| Input Optical Wavelength | λIN | 1320 | 1330 | 1340 | nm | PIN-TIA |
| Receiver Sensitivity | PIN | -14 | dBm | Note (1) | ||
| Input Saturation Power (Overload) | PSAT | -3 | dBm | |||
| Los Of Signal Assert | PA | -30 | dBm | |||
| Los Of Signal De-assert | PD | -17 | dBm | Note (2) | ||
| LOS Hysteresis | PA-PD | 0.5 | 2 | 6 | dB |
Note (1): Measured with Light source 1330nm, ER=5dB; BER =<10^-12 @PRBS=2^7-1 NRZ
Note (2): When LOS de-asserted, the RX data+/- output is High-level (fixed)
